HP Series Manual Vacuum Thermoforming Machine
- Overview
HP series manual thermoforming machines are designed for small batch or samples products. It takes the principle of thermoplastics vacuum thermoforming. The machine is light weight, small size and easy operation. The heating station and forming station work synchronously, therefore it works high production efficiency.
- Machine Structure
The feeding is driven by stepping motor, which is low cost, high precision, and the maximum diameter of the material roll can reach 450mm, the width of the material coil 610mm (fixed value).
Heating system has upper and lower electric furnaces, according to the actual need to enable the lower electric furnaces, heating tiles using standard heating tiles, easy to purchase accessories in case they are broken. Temperature control module, PLC and touch screen linkage control, high degree of automation, fast response, high accuracy, temperature setting and current temperature display, are realized in the touch screen.
Forming station, the cylinders drive the upper and lower die for product forming, the forming mold is installed in the lower mold table, can be vacuum pumping and cooling water cooling, the upper mold table can be free to add auxiliary forming tooling according to the shape of the product.
The layout is driven by rod-less cylinder, and the height is adjustable, which can flexibly adapt to different product needs.
This machine is not equipped with cutting station, the customer needs to buy the cutting station, the cutting area is not less than 700×800, the cutting force is not less than 35 tons.
- Suitable Material/Products
The machine is suitable for almost all kind of thermoforming plastics with the thickness 0.2-2mm. The maximum forming area of the machine is 610x560mm and the maximum forming height is 120mm. It can be used to make electronic tray, fast food box, egg tray and other products.
- Machine Parameter
| 1 | Overall Power | 30KW（excluding cooling machine） |
| 2 | Max Forming Size | 560x610mm |
| 3 | Max Forming Height | 120mm |
| 4 | Max thickness | 2mm |
| 5 | Machine Dimensions | 2000*1900*1230mm |
| 6 | Weight | 800Kg |
| 7 | Power | AC380V，50Hz |
| 8 | Air | 0.7MPa |
| 9 | Customer Supplied | Air compressor、Tank（no less than 100L）、
Cooling Machine（If need） |
- Configurations
| 1 | PLC、HMI | Simens |
| 2 | Pneumatic | Airtak |
| 3 | Vacuum Pump | Domestic Famous |
| 4 | Step Motor | Domestic Famous |
